PAgeTROUBLESHOOTINGheader.....
Problem | Easy Solution |
|
|
Ice cream won’t | • Compressor is not chilling or on. |
freeze | • Alcohol in ice cream? Added too much or too soon. |
| |
| • Ensure there is adequate ventilation around the machine. |
| We recommend a minimum of 6 inches around the vents. |
|
|
Paddle won’t move | • If the |
| ice may have formed in bowl. Turn unit off and check for ice. |
| Allow to defrost and dry thoroughly. |
| • Check to see if center spindle is inserted correctly into plastic |
| paddle; if this is not the case then there is an internal issue – |
| call Breville customer service. |
|
|
Lid will not lock | • Paddle and bowl are not positioned properly – make sure |
into position | the handle of the bowl sits within the grooves and paddle is |
| inserted properly. |
|
|
Frozen dessert not | • Dessert mixture was too warm when placed in the ice cream |
frozen in allocated | bowl for time allocated in manual setting. |
time |
|
|
|
Can’t remove | • Outside of bowl may have been wet. Turn unit off and wait |
bowl insert after | approximately 5 minutes for defrosting to take place. |
churning |
|
|
|
How do I make soft | • The frozen desserts on the hardness indicator bar are only there as |
serve ice cream? | a guide. Try making your soft serve on the sorbet setting. You can |
| turn the hardness back up if the ice cream is not hard enough. |
|
|
I want my ice | • Remove ice cream from ice cream bowl, place in another air- |
cream even harder! | tight container and place in freezer for a further 60 minutes or |
| until desired hardness is achieved. |
|
|
Can I put my mix- | • Yes. Put your |
ins into the custard | Note: often ingredients such as fruits may disintegrate during |
base? | the churning process if added too early. |
|
|
My ice cream | • The internal compressor is mounted on special rubber mounts |
maker seems to be | to reduce the noise and vibration during operation. When |
vibrating briefly? | cooling is not required the compressor will automatically turn |
| off and a small amount of vibration for |
|
|
28
BCI600XL_IB_E12_FA.indd 28 | 7/02/12 2:58 PM |