Henny Penny OFG-390 manual Datos Tecnicos Para Products CE

Page 5

Model OFG- 390

 

Technical Data for CE Marked Products

Nominal Heat Input:

Natural (I2H) = 26,4 kW

(90,000 Btu/h)

(Net)

Natural (I2E) = 26,4 kW (90,000 Btu/h)

 

Natural (I2S) = 23,75 kW (81,000 Btu/h)

 

Liquid Propane (I3P) = 27,0 kW

(92,000 Btu/h)

Nominal Heat Input:

Natural (I2H) = 29,3 kW

(100,000 Btu/h)

(Gross)

Natural (I2E) = 29,3 kW (100,000 Btu/h)

 

Natural (I2S) = 26,4 kW (90,000 Btu/h)

 

Liquid Propane (I3P) = 29,3 kW

(100,000 Btu/h)

Supply Pressure:

Natural (I2H) = 20 mbar

 

 

 

Natural (I2E) = 20 mbar

 

 

 

Natural (I2S) = 25 mbar

 

 

 

Liquid Propane (I3P) = 37/50 mbar

 

Test Point Pressure:

Natural (I2H) = 8,7 mbar

 

 

 

Natural (I2E) = 8,7 mbar

 

 

 

Natural (I2S) = 8,7 mbar

 

 

 

Liquid Propane (I3P) = 25 mbar

 

Injector Size:

Natural (I2H) = 2,51 mm

 

 

 

Natural (I2E) = 2.51 mm

 

 

Natural (I2S) = 2.85 mm

Liquid Propane (I3P) = 1,04 mm

This appliance must be installed in accordance with the manufacturer’s instructions and the regulations in force and only used in a suitable ventilated location. Read the instructions fully before installing or using the appliance.

 

Datos Tecnicos Para Products CE

Consumo Calorico Nominal:

Gas Natural (I2H) = 26,4 kW

(90,000 Btu/h)

(Neto)

Gas Natural (I2E) = 26,4 kW (90,000 Btu/h)

 

Gas Natural (I2S) = 23,75 kW (81,000 Btu/h)

 

Propano Licuado (I3P) = 27,0 kW

(92,000 Btu/h)

Consumo Calorico Nominal:

Gas Natural (I2H) = 29,3 kW

(100,000 Btu/h)

(Bruto)

Gas Natural (I2E) = 29,3 kW (100,000 Btu/h)

 

Gas Natural (I2S) = 26,4 kW (90,000 Btu/h)

 

Propano Licuado (I3P) = 29,3 kW

(100,000 Btu/h)

Presion De Alimentacion:

Gas Natural (I2H) = 20 mbar

 

 

 

Gas Natural (I2E) = 20 mbar

 

 

 

Gas Natural (I2S) = 25 mbar

 

 

 

Propano Licuado (I3P) = 37/50 mbar

Presion En Ez Punto De Prueba:

Gas Natural (I2H) = 8,7 mbar

 

 

 

Gas Natural (I2E) = 8,7 mbar

 

 

 

Gas Natural (I2S) = 8,7 mbar

 

 

 

Propano Licuado (I3P) = 25 mbar

 

Diámetro Boquilla:

Gas Natural (I2H) = 2,51 mm

 

 

 

Gas Natural (I2E) = 2.51 mm

 

 

Gas Natural (I2S) = 2.85 mm

Propano Licuado (I3P) = 1,04 mm

Este equipo debe instalarse únicamente en un recinto adecuadameute ventilado y conforme a las indicaciones del fabricante y a las normas vigentes. Lea completamente las instrucciones antes de instalar o usar este equipo.

Image 5
Contents OPERATOR’S Manual Page Limited Warranty for Henny Penny Equipment Keep appliance area free and clear from combustibles Datos Tecnicos Para Products CE Henny Penny Head GAS Open Fryer SpecificationsTable of Contents Assistance IntroductionProper Care Hazardous Situation WHICH, if not SafetyAVOIDED, will Result in Death or Serious InjuryPage Unpacking Instructions InstallationUnpacking Remove the counterweights from the pallet, which areInstructions Strapped to the pallet, under the fryerOptional Ramp Unloading Model OFG 908 Selecting Position and install fryer to prevent tipping or moveLocation Ment. Restraining ties may be used for stabilizationGAS Supply Ventilation of FryerFryer must be isolated from the gas supply piping During any pressure testing of the gas supply pipingSystem by closing its individual manual shutoff valve System at test pressures equal to or less than 1/2Model OFG 303 GAS Pressure Regulator SettingGAS Leak Test Requirements ElectricalModel OFG Page Operation Operating Components High Limit Airflow SwitchIgnition Modules Spark IgnitorsIndicators SwitchesLID Operation Melt CycleAlthough the Displaywillread Cool Switches IndicatorsDuring the Standby MODE, the Shorten ING is HOT and will Cause BurnsSMS Controls Filling or Adding Shortening Basic Operation Cool Which could Result in Serious Burns Care ShorteningPersonal INJURY, FIRE, AND/OR Property With Prolonged USE, the FlashpointFiltering of Shortening Turn COOK/PUMP switch to OFF positionSHORTENING, IT’S Possible That the Filter Cloth or Glove When TighteningConnection AT the Union on the Filter Tube is not Tightened PROPERLY. if SOLightingand Shutdown of the Burners Cleaning the Frypot Regular Maintenance ResetFilter Pump Motor PROTECTOR-MANUALLubricating Lid Rollers -Annually Preventive MaintenanceCleaning the Nylatrons Monthly Maintenanc PreventiveCode ProgrammingAfter the proportional control, press and release Reset Usage Special Program ModeProgramming Review UsageSpeaker Frequency, Codes, Initialize System Factory Presets F/C, Gas/Electric, Speaker VolumeAppliance Test Tech I/O ModeMode Special ProgramHeat Control Problem Cause Correction Troubleshooting Trouble Shooting GuideDisplay Cause Panel Board Correction Error Codes303 O S S a R Y Model OFG Shortening level also referred to as fill lines Gas fryers only See ignition modules Henny Penny Corp., Eaton, Ohio 45320, Revised