Support

In case of any operation problems, contact the Franke Technical Service Centre (see attached list); refer to the following table of error codes that can appear on the display (D).

Error		Description	What to do
code		Description	What to do
code

Er36		Control panel temperature sensor short circuit	Contact the Technical Service Centre
Er39		Wrong programming options (fuses, lockbits)	Contact the Technical Service Centre

Er20		Faulty controller flash. Wrong check total	Contact the Technical Service Centre

Er37		Shift register signal feedback error on selection	Contact the Technical Service Centre
Er37		or activation of segments	Contact the Technical Service Centre
		or activation of segments
Er26		Relay voltage too high on switching off or too	Contact the Technical Service Centre
Er26		low on switching on	Contact the Technical Service Centre
		low on switching on

		Button panel error: at least one button with	Temporary error, if it occurs again contact
Er22		invalid level or invalid range of button panel	Temporary error, if it occurs again contact
Er22		invalid level or invalid range of button panel	the Technical Service Centre
		supply voltage	the Technical Service Centre
		supply voltage

		Permanent operation (min. 10 sec) with	Wrong programming (see instructions on
		Permanent operation (min. 10 sec) with	Wrong programming (see instructions on
		switching off of a cooking zone	previous page)
		switching off of a cooking zone	previous page)

	E2	Overheating (detected by the control panel)	Check the presence of any hot objects on
	E2	Overheating (detected by the control panel)	the control panel
			the control panel

		Permanent operation (min. 10 sec) without	Wrong programming (see instructions on
		Permanent operation (min. 10 sec) without	Wrong programming (see instructions on
		switching off of a cooking zone	previous page)
		switching off of a cooking zone	previous page)

Never make use of unauthorised technicians.

Specify:

–the type of fault;

–the appliance model (Art.);

–the serial number (S.N.);

This information is given on the appliance dataplate on the warranty certificate.

Safety instructions

Always contact qualified personnel in the following cases:

-installation (see the installation section);

-doubts regarding operation.

Contact an authorised service centre in the following cases:

-immediately after unpacking, in case of doubts about the integrity of the appliance;

-appliance malfunction or poor operation, requesting original spare parts.

General instructions

To ensure safe and efficient operation of this appliance:

-only contact authorised service centres;

-always demand the use of original spare parts;

-the appliance is designed for non-professional, domestic use; do not modify its characteristics;

-the dataplate gives the symbols indicating the countries for which the instructions apply;

-appliance electrical safety is guaranteed only when it is connected to an earthing system in compliance with the current regulations;

-do not touch the cooking zones during or immediately after use, as they become very hot; keep children away;

-only cook food using suitable pots and pans, and never place the food directly on the heating surface;

-before any cleaning or maintenance operations, or in case of malfunction, disconnect the appliance from the mains power supply;

-always make sure the knobs are in the Off position when the appliance is not in use, or that the control zone is switched off.

FHPL 301 1CO specifications

The Franke Consumer Products FHPL 301 1CO is a high-quality kitchen appliance that reflects the company's commitment to innovation and functionality. Designed to seamlessly integrate into modern kitchens, this product stands out for its user-friendly features and advanced technology aimed at enhancing culinary experiences.

One of the key features of the FHPL 301 1CO is its spacious capacity. Its thoughtfully designed layout offers ample room for cooking large meals, making it ideal for families or those who love entertaining guests. The appliance's streamlined design not only optimizes space but also adds a touch of elegance to any kitchen.

The FHPL 301 1CO is equipped with advanced cooking technologies that ensure optimal performance. The inclusion of precise temperature control allows users to achieve perfect results every time, whether it’s baking, simmering, or grilling. Moreover, the appliance features a rapid heating element that significantly reduces cooking time, making it a perfect choice for those with busy lifestyles.

Another standout characteristic of the FHPL 301 1CO is its energy efficiency. Designed with eco-friendly technologies in mind, this appliance minimizes energy consumption without compromising performance. This not only contributes to cost savings on utility bills but also aligns with the growing consumer demand for sustainable products.

The user interface of the FHPL 301 1CO is intuitive and easy to navigate. It features a digital display that allows users to monitor cooking times and temperatures accurately, eliminating guesswork in the kitchen. The appliance also offers multiple cooking modes and presets, catering to various culinary preferences and making it suitable for a wide range of recipes.

Maintaining the FHPL 301 1CO is hassle-free, thanks to its easy-to-clean surfaces and components. The design incorporates materials that resist stains and food build-up, ensuring that the appliance remains in excellent condition over time.

In conclusion, the Franke Consumer Products FHPL 301 1CO is an exemplary kitchen appliance that combines modern design with advanced cooking technologies. Its generous capacity, energy efficiency, and ease of use make it an attractive option for homeowners looking to elevate their cooking experience. Whether preparing simple meals or hosting elaborate dinner parties, the FHPL 301 1CO is a versatile companion that promises consistent performance and reliability, making it a valuable addition to any kitchen.