TAPE PLAYBACK
BASIC OPERATIONS | ||
zTAPE EJECT |
| |
| DOLBY NR | |
FUNCTION |
| |
REV MODE |
| |
JOG MODE |
| |
VOLUME/ | SHIFT | |
MULTI JOG | ||
| ||
DOLBY NR |
| |
PLAYING BACK A TAPE
Load a tape.
1Press DOLBY NR on the main unit repeatedly, or press DOLBY NR repeatedly while pressing
SHIFT on the remote control.
For tapes recorded with DOLBY NR, turn on the h NR
TAPEindication.
For tapes recorded without DOLBY NR, turn off the hNR
indication.
NR
RADIO | RECEPTION |
TAPE | PLAYBACK |
LOADING A TAPE
•You can select a reverse mode to play back one or both sides.
•Use Type I (normal), Type II (high/CrO2) or Type IV (metal) tapes for playback.
1Press TAPE on the remote control.
Or press FUNCTION on the main unit repeatedly until "TAPE" appears on the display.
2Press zTAPE EJECT to open the cassette holder.
zTAPE EJECT 
3Load a tape with the exposed side facing to the
right.
Fully insert the tape into the cassette holder until it clicks.
Exposed side
Push the cassette holder to close.
To select a reverse mode
Press REV MODE and the mode changes.
To play one side only, select p.
To play from the side facing upward to the opposite side once only, select [.
To play both sides repeatedly, select ].
You can also use JOG MODE and VOLUME MULTI JOG: Press JOG MODE repeatedly until "DOLBY NR" appears on the display, then within 6 seconds, turn VOLUME/MULTI JOG to turn on or off the h NR indication.
2Press dto start play.
Playback side of the tape
The tape counter indicates the tape running length.
(It disappears when no tape is loaded.)
C: The side facing upward is being played (forward).
X: The opposite side is being played (reverse).
About the level indicator
The above display automatically changes to the level indicator after 4 seconds.
The level indicator shows an approximate playback sound level.
To stop play, press s.
To pause play, press a. To resume play, press again.
To change the playback side, press din play or pause mode. To fast forward or rewind, press f or g in stop mode.
Then press sto stop the tape.
To start play when the power is off (Direct Play Function)
Press TAPE on the remote control. The power is turned on and play of the loaded tape begins.
To set the tape counter to 0000
Press sin stop mode.
The counter is also set to 0000 when the cassette holder is opened.
ENGLISH 11
En