touch the machine when his hands or feet are wet or damp;
use the machine when there are children in its proximity;
allow the machine to be used by children or unfit people;
obstruct the suction or dispersal grilles with cloth or any other thing;
do not use the machine when wet or very damp.
4.1. precautionary measures
This machine may only be used with foodstuffs. It cannot be used for heating liquids or grinding any other kind of product that could damage and pollute it.
The manufacturer cannot be held responsible for damage to people or things caused by unsuitable, erroneous or irrational use.
5. TRANSPORT
5.1. Packaging
The machine is delivered in a strong cardboard box with internal protection.
The packaging bears symbols which must be observed during handling and stocking of the item.
Always keep the package in a vertical position during transport. Do not turn it over or lay it on its side and avoid bumping and exposure to atmospheric agents.
5.2. Inspection on receipt
Check that the machine received corresponds to the one indicated on the delivery note, including any accessories.
Check that it has not been damaged during transport and, if so, inform the forwarder and our customer service office immediately.
The packing elements (plastic bags, expanded polystyrene, nails, cardboard, etc.) must not be left within reach of children as they are potential sources of danger. Do not dispose of the packing elements in the environment; consign them to firms authorized for their disposal.
6. INSTALLATION
The machines are fitted with height adjustable feet.
The surface must be well levelled, dry, smooth, strong, stable and at a height of approximately 110 cm from the floor.
It does not need to be anchored to the surface and it does not require any technical operations to dampen vibrations in order to operate properly.
It is recommended to leave the area around the machine free to facilitate its use and the performan- ce of any maintenance operations.
If the machine is wet or very damp, wait until it is completely dry before installing or using it. It is always necessary to request an accurate control to qualified service people in order to find any possible damage to the electric components.
Reserve an area near the machine for the installation of the coffee grinding and dosage machine (see relevant documentation).
The machine is usually equipped with a water softener, type DP2 or DP4, which must be connected by the user in compliance with the laws in force. Should a different softener be installed, refer to the documentation of the relevant product.
A dreg drawer should be fitted by the installer.
6.1. Connections to be made by the 
user.
6.1.1. Water and gas supply (Fig.6)
Connections must be installed close to the machine.
Water drainage pipe 1, having a minimum internal diameter of 30 mm, equipped with a
Water supply pipe 2, with a 3/8"G
Gas supply pipe 3, with a cutoff tap.
The machine with gas heating must be installed in compliance with current local laws.
60