Kenmore 106.511800 manual Ice Maker Control, Cssmemo8cs, Turning the Ice Maker On/Off

•Do not use anything sharp to break up the ice in the storage bin. This can cause damage to the ice container and the dispenser mechanism.

•Do not store anything on top of or in the ice maker or storage bin.

Turning the Ice Maker On/Off:

The On/Off switch can only be accessed when the ice storage bin has been removed. The switch is located on the freezer door, on the left side of the wall that surrounds the ice storage bin. See the following section for bin removal instructions.

NOTE: It is not necessary to turn the ice maker control to the OFF (right) position when removing the storage bin. The sensor cover ("flipper door"), located on the right wall of the freezer door, stops the ice maker from producing ice if the door is open or the storage bin is removed.

On0,;I

Ice Maker Control

•To turn on the ice maker, slide the control to the ON (left) position.

•To manually turn off the ice maker, slide the control to the OFF (right) position.

NOTE: The ice maker has an automatic shutoff to keep the storage bin from overfilling during normal operation. The ice maker sensors will automatically stop ice production, but the control will remain in the ON (left) position.

Removing and Replacing Ice Storage Bin:

1.Press down the release lever and tilt the bucket outward. Use

both hands to hold the base of the storage bin, then lift it up and out.

A. OnjOff switch

B. Sensor cover

2.Replace the bin by sliding it onto the door, then tilting it back into an upright position. The release lever will click when the bin is securely in place.

REFRIGERATOR FEATURES

Your model may have some or all of these features. Features that can be purchased separately as product accessories are labeled with the word "Accessory." Not all accessories will fit all models. If you are interested in purchasing one of the accessories, please call the toll-free number on the back cover or in the "Accessories" section.

	important	information	to know	about	glass	shelves
	an_ covers:
	Do not clean glass shelves or covers with warm water when
	they are cold. Shelves and covers may break if exposed to
	sudden temperature		changes or	impact,	such	as bumping.
	Tempered glass is designed to shatter into many small,
	pebble-size	pieces. This is normal. Glass shelves and covers
	are heavy. Use both hands when removing them to avoid
\	dropping.
	A

					Doo		B Jss
A. Re/ease/ever				{c_ss_:_memo8c_s}
To Remove and Replace the Bins:
1.	Remove	the	bin	by	lifting	it and pulling		it	straight	out.
2.	Replace	the	bin	by	sliding	it	in above	the	desired	supports
	and pushing		it down		until	it	stops.

21