Shindaiwa 89309 manual Work Safely, Stay Alert, Safety devices and labels, Use Good Judgement

Page 3

Safety

Work Safely

A hedge trimmer has the potential to cause serious personal injury to the opera- tor or bystanders if misused, abused or mishandled. To reduce the risk of injury, you must maintain control at all times, and observe all safety precautions during operation. Never permit a person without training or instruction to operate this machine!

Stay Alert

You must be physically and mentally fit to operate this unit safely.

WARNING!

Never make unauthorized attachment installations. Always use genuine Shindaiwa parts and acces- sories when repairing or maintaining this unit.

WARNING!

Never operate power equipment of any kind

if you are tired or if you are under the

LQÀXHQFHRIDOFRKROGUXJVPHGLFDWLRQ or any other substance that could affect your ability or judgement.

WARNING!

Use Good Judgement

NEVER transport the unit or leave it unattended with the engine running. An engine that’s running could be accidently accelerated causing the blades to move.

Make sure that the blade cover is in place when transporting or storing the hedge trimmer.

ALWAYS make sure that the cutter attachment and all handles and guards DUHSURSHUO\LQVWDOOHGDQG¿UPO\WLJKWHQHG before operation.

Inspect for broken, missing or improperly installed parts or attachments.

NEVER use a cracked or warped cutter or cutter bar: replace it with a serviceable RQHDQGPDNHVXUHLW¿WVSURSHUO\

Make sure there are no missing or loose fasteners, and that the stop switch and throttle controls are working properly.

Make sure there is always good ventila- tion when operating the hedge trimmer. Fumes from engine exhaust can cause serious injury or death. NEVER run the engine indoors!

NEVERVPRNHRUOLJKW¿UHVQHDUWKH hedge trimmer. Keep the unit away from excessive heat. Engine fuel is very ÀDPPDEOHDQG¿UHFRXOGOHDGWRVHULRXV personal injury or property damage.

Do not operate this machine with the

PXIÀHUUHPRYHG

NEVER attempt cutter adjustment with the engine running!

Before starting the engine, make sure the cutter is not contacting anything.

ALWAYSFRQ¿UPVDIHRSHUDWLRQZKHQ using the machine, especially when operating on steps or a ladder.

Immediately stop the engine with the stop switch if the machine suddenly begins to vibrate or shake.

ALWAYS stop the engine immediately and check for damage if you strike a foreign object or if the machine becomes tangled. Do not operate with broken or damaged equipment.

When cutting a branch that is under ten- sion, be alert for spring-back so that you will not be struck by the moving branch.

If a cutter should bind fast in a cut, shut off the engine immediately. Push the branch or tree to ease the bind and free the cutter.

ALWAYS stop the engine and allow it to FRROEHIRUHUHIXHOLQJ$YRLGRYHU¿OOLQJDQG wipe off any fuel that may have spilled.

7RUHGXFH¿UHKD]DUGNHHSWKHHQJLQH

DQGPXIÀHUIUHHRIGHEULVOHDYHVRU excessive grease.

Safety devices and labels

ON-OFF Switch

Throttle

Interlock

Cover

HOT SURFACE

Protector

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAUTION READ AND

WEAR EYE

THE BLADES

KEEPS HANDS

FOLLOW THE

AND HEARING

ARE SHARP!

CLEAR OF

INSTRUCTIONS PROTECTION

HANDLE WITH

CUTTER

IN THE

AT ALL TIMES

%#4'aaaaaaaaa

BLADES WHEN

OPERATORS

DURING

 

 

STARING THE

MANUAL.

12'4#6+10aaaaaaaaa

'0)+0'aaaaaaaaa

IMPORTANT!

Caution, Danger, Warning, and Operation Information Labels: Make sure all information labels are undamaged and readable. Immediately replace damaged or missing information labels. New labels are available from your local authorized Shindaiwa dealer.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents HT231 Hedge Trimmer Contents Safety and operation labelsIntroduction Stay Alert SafetySafety devices and labels Work SafelyWipe off any fuel that may have To the unit Spilled Operating the Hedge TrimmerRPM without a load. Doing so could It free of loose vegetation, mud, etcDo not alter this machine or any of its components Product DescriptionMinimize the Risk of Fire Mixing fuelFilling the fuel tank Examples of 501 mixing quantitiesMake sure you have a secure Starting the EngineBefore starting the engine Starting the EngineAdjusting engine idle Stopping the engineOperation Spark Plug MaintenanceGeneral maintenance Daily maintenanceHour maintenance 10 15 hour maintenanceEvery 20 and 100 hours Often in dusty or dirty conditions Throttle free play adjustmentCutter blade adjustment Every 50 hours of operation moreSult your servicing dealer Long Term StorageRemove the spark arrester screen For carbon buildupPossible Cause Troubleshooting GuideEngine does not Start What To CheckEngine is knocking LOW PowerIs the engine overheating? Operate at slower rateAdditional Problems Emission System Warranty Statement NOTAs Remarques Remarques 731-3167, Japan ¡ADVERTENCIA Cortasetos HT231Etiquetas informativas sobre seguridad y funcionamiento IntroducciónContenido Declaraciones De SeguridadEtiquetas de seguridad SeguridadTrabaje con cuidado Mantengase AlertaSeguridad continuación Precauciones de operacionesDe hierba, barro, etc Vshflàfdflrqhv Descripción del ProductoAdvertencia Mezcla de CombustibleLlenando el Tanque de Combustible PrecauciónArranque del motor Antes de usarlaArranque del motor Operación Arranque del motor continuaciónParada del Motor Ajuste de la Marcha MínimaBujía MantenimientoMantenimiento generale SilenciadorMantenimiento continuación Mantenimiento cada 10 horasCada 20 y 100 horas Retire y reemplace el elemento del filtro Mantenimiento cada 50 horasCuchillas Más frecuente en condiciones polvorientas o adversasAlmacenamiento de Largo Plazo Mantenimiento cada 139 horasPosible causa Guia DiagnosticoEL Motor no Arranca Qué revisarDepósitos de carbonilla en el pistón o el silenciador Guia Diagnostico continuaciónBaja Potencia ¿Se sobrecalienta el motor?Otros Problemas Que Está Cubierto Por Esta Garantía Esta garantía es administrada porSus Derechos y Obligaciones de Garantía Cobertura de la Garantía del FabricanteRemarques SP18 SP19 Tualatin, Oregon 97062 USA 11, Ozuka-Nishi Avertissement TAILLE-HAIE À Lame HT231Mise EN Garde Table des MatièresMises en garde Étiquettes au fonctionnement et à la sécuritéSécurité Sécurité au travailÉtiquettes de sécurité Sécurité suite Maintien prévu recommandé Ment serré avant toute utilisationCaractéristiques techniques NomenclatureRéduire les risques d’incendie Mélange de carburantRemplissage du réservoir à carburant Exemples de quantités de mélange de carburant àDémarrage du moteur Avant démarrageDémarrage du moteur Utilisation Démarrage du moteur suiteArrêt du moteur Réglage du ralenti du moteurEntretien Toutes les 20 et 100 heures d’utilisation Entretien suiteEntretien aux 10 heures Toutes les 10 à 15 heures d’utilisationRéglage de la lame Remplacement du filtre à carburantEntretien aux 50 heures Le jeu du levier d’accélérateurEntretien aux 139 heures Remisage à long termePoints à contrôler SolutionGuide de dépannage LE Moteur NE Démarre PASLe moteur cogne Guide de dépannage suitePuissance Insuffisante Le moteur surchauffe-t-il ?Autres Problèmes Couverture de la garantie La présente garantie est administrée parVos droits et obligations en vertu de la garantie Couverture de la garantie des fabricantsFR17 FR18 FR19

89309 specifications

Shindaiwa 89309 is a high-performance trimmer head designed for both professional landscapers and avid gardeners who demand reliability, efficiency, and ease of use. This product stands out in a crowded market due to its innovative engineering and robust construction, making it an essential tool for those who take lawn care seriously.

One of the main features of the Shindaiwa 89309 is its durable design. Constructed from high-quality materials, it is built to withstand the rigors of everyday use while maintaining optimal performance. This means users can tackle tough tasks without the fear of wear and tear, ensuring longevity and durability.

The trimmer head integrates advanced technologies to improve efficiency and ease of operation. One of its most notable technologies is the easy-loading spool system, which allows users to quickly and effortlessly reload the line. This feature significantly reduces downtime, enabling users to get back to their work without hassle.

Additionally, the Shindaiwa 89309 is designed with a dual-line cutting system, which enhances its cutting performance. This system provides a wider cutting path, allowing users to cover more ground in less time. The trimmer head delivers clean and precise cuts, ultimately resulting in a neater finish for lawns and gardens.

Another key characteristic of the Shindaiwa 89309 is its compatibility. The trimmer head works seamlessly with various Shindaiwa machines, allowing for versatility and ease of integration into existing tool collections. This adaptability makes it a practical choice for professionals with multiple pieces of equipment.

Moreover, the Shindaiwa 89309 features an efficient balance that reduces user fatigue. The lightweight design combined with a well-thought-out weight distribution allows for extended periods of use without straining the operator, which is crucial in a demanding work environment.

In summary, the Shindaiwa 89309 trimmer head embodies the perfect blend of durability, efficiency, and user-friendly features. Its advanced technologies, including the easy-loading spool and dual-line cutting system, make it an invaluable tool for achieving pristine landscaping results. Whether for professional use or personal projects, the Shindaiwa 89309 stands out as a reliable choice for trimmers and gardeners alike.
Top Page Image Contents