Shindaiwa 502s, 69033-94310 manual Assembly and Adjustments, Prior to assembly

Page 7

Assembly and Adjustments

Prior to assembly

Before assembling, make sure you

 

WARNING!

have all the components required for a

Do not make unauthorized

complete unit:

■■Spark plug/13 mm socket wrench

modifications to this saw, guide bar,

or chain!

(Scrench)

 

 

Carefully inspect all components for damage.

IMPORTANT!

The operational procedures described in this manual are intended to help you get the most from this unit and also to protect you and others from harm. These proce- dures are general guidelines only, and are not intended to replace any additional safety rules or laws that may be in force in your area. If you have any questions regard- ing your Shindaiwa chain saw, or if you do not understand something in this manual, your Shindaiwa dealer will be glad to assist you. For additional information, you may also contact Shindaiwa Inc. at the address printed on the back of this manual.

Installing and Adjusting the Guide Bar and Saw Chain

 

 

 

 

 

NOTE:

 

 

 

For longest chain life, place new or

 

 

 

replacement chain loops in oil and soak

 

 

 

overnight before installation.

 

 

 

 

 

 

 

IMPORTANT!

 

 

 

The chain brake must be completely dis-

 

Guide Bar

 

engaged before removing or installing

 

 

 

 

 

the clutch cover.

 

 

1. Use the socket wrench to remove the

 

 

 

clutch cover nut(s) in a counter- clock-

 

 

 

wise rotation.

 

 

2. Remove the clutch cover.

 

 

3. Remove and discard the packing spacer.

 

 

4. Place the guide bar over the guide bar

 

Studs

 

stud(s) and chain tensioner pin.

 

 

 

 

 

Clutch Cover

 

 

 

CAUTION!

 

Nuts

 

 

 

 

Failure to align the guide bar and chain

 

 

 

tensioner pin can cause serious dam-

 

 

 

age to the clutch cover, guide bar, ten-

 

Spacer (discard)

 

sioner pin, and/or engine crankcase!

 

 

 

 

 

 

 

 

 

 

 

 

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 502s Chain SAW Introductions ContentsKickback can happen lightning-fast Chain Saw Kickback Safety DevicesKickback Safety Precautions Chain BrakeStop the engine before setting the chain saw down Additional Safety PrecautionsImproper maintenance, use of non Safety Labels Unit Description SpecificationsRecommended BAR and Chain Combinations Prior to assembly Assembly and AdjustmentsInstalling and Adjusting the Guide Bar and Saw Chain Re-Adjusting the Saw Chain Never operate this saw Without the clutch cover installedFilling the fuel tank Mixing fuelBar Oil Starting the Engine Oil Pump AdjustmentEngine Start Saw chain must never rotate at engine idle speed Stopping the Engine Adjusting Engine IdleIdle Speed Adjustment Starting a Flooded EngineChain Brake Maintenance Chain Brake TestingChain Brake Felling Small Trees Cutting with the SawFelling Trees Before Felling a TreeBucking Felling Larger TreesLimbing Maintenance Spark Arrester Maintenance 40/50 Hour MaintenanceLong Term Storage For consistent filing angles, use a filing guide Saw Chain PerformanceHow the Saw Chain Works Sharpening TechniqueRemedy Troubleshooting GuideWhat To Check Possible CauseSymptom Additional ProblemsLimited Warrantly Page Specifications subject to change without notice 502s Motosierra Índice IntroducciónNotas de interés especial Equipo de corte Dispositivos de seguridad de contragolpe de la motosierraPrecauciones de seguridad contra los contragolpes Freno de la cadenaPrecauciones adicionales de seguridad Rótulos de seguridad Especificaciones Descripción de la unidadCombinaciones Recomendadas DE Barra Y Cadena Antes de Ensamblar Ensamblar y adjusteEmbrague Ensamblar y adjuste continuaciónReajuste de la cadena de la sierra Precaución Mezcla del combustibleLlenando el tanque de combustible Aceite de la barraArranque del motor Aceite de la barra continuaciónArranque del motor Ajuste de la bomba de aceiteArrancando un motor ahogado Arranque del motor continuaciónDetención del motor Ajuste de la marcha mínimaMantenimiento del freno de la cadena Freno de la cadenaPrueba del freno de la cadena Funcionamiento del freno de la cadenaCON Corte con la sierraTala de árboles ¡PROCEDADesrame Tala de árboles ContinuaciónTala de árboles grandes TronzadoMantenimiento Mantenimiento del guardachispas Mantenimiento continuacionAlmacenamiento prolongado Mantenimiento luego de 40 a 50 horas de usoPara limar en ángulos iguales, use una guía para la lima Rendimiento de la cadena de la sierraFuncionamiento de la cadena de la sierra Técnica de afiladoRemedio Guía de localización de fallasQué Revisar Posible causaQué Revisar Posible causa Guía de localización de fallas continuaciónEsta Garantía ES Administrada POR Notas SP22 Scie À Chaîne 502s AVERTISSEMENT  IntroductionTable des matières Mises en gardeAVERTISSEMENT  Avertissement Dispositifs antirebond de la scie à chaîneConsignes de sécurité relatives au rebond Frein de chaîneREMARQUE  Autres consignes de sécuritéÉtiquettes de sécurité Description de l’appareil Combinaisons DE Guide ET DE Chaîne RecommandéesCaractéristiques techniques Mise EN GARDE  Installation et réglage du guide-chaîne et de la chaîneAssemblage et réglage Avant l’assemblageNe jamais utiliser la scie sans Assemblage et réglage suiteRéglage de la chaîne Remplissage du réservoir à carburant Mélange d’essenceHuileur du guide Démarrage du moteur  Huileur du guide suiteDémarrage du moteur Réglage de la pompe à huileRéglage du régime de ralenti  Démarrage d’un moteur noyéArrêt du moteur Réglage du ralenti moteurFonctionnement du frein de chaîne Frein de chaîneVérification du frein de chaîne Entretien du frein de chaîneAbattage d’arbres Utilisation de la scieAbattage de petits arbres Ébranchage Abattage d’arbres suiteAbattage d’arbres de grande taille TronçonnageEntretien Entretien du pare-étincelles Entretien suiteRemisage à long terme Entretien aux 40 à 50 heuresFonctionnement de la chaîne Performances de la chaîne de la scieMéthode d’affûtage Points à contrôler SolutionPoints à contrôler Cause probable Solution Guide de dépannageAutres Problèmes Guide de dépannage suiteLimitations Étendue DE LA Garantie DU FabricantResponsabilités DU Propriétaire À L’ÉGARD DE LA Garantie Pièces Prises EN ChargeFR21 Shindaiwa Inc

69033-94310, 502s specifications

The Shindaiwa 502S is a powerful and versatile handheld blower known for its performance and efficiency in the landscaping and lawn care industries. Engineered for both professionals and homeowners, this model delivers a range of features that make it an exceptional tool for clearing debris, leaves, and grass clippings with ease.

At the heart of the Shindaiwa 502S is its robust engine, a 50.2cc two-stroke engine that provides reliable power while ensuring optimal performance. This engine is designed with advanced technology, offering high air volume and velocity, which allows users to tackle even the toughest blowing tasks effectively. The engine is also equipped with a fuel-efficient design that minimizes emissions, aligning with today’s environmental standards.

One of the key features of the 502S is its lightweight construction. Weighing in at just over 10 pounds, this blower is designed for user comfort, allowing extended periods of operation without excessive fatigue. Its ergonomic design includes a padded harness and adjustable handle, which provides a more balanced and comfortable grip. This design is particularly beneficial for professional landscapers who require a tool that promotes productivity without sacrificing comfort.

The Shindaiwa 502S also features a highly responsive throttle trigger, which allows for precise control over the airflow. This enhances user control when navigating around delicate plants or in enclosed spaces. Additionally, the blower is designed with a heavy-duty air filter, promoting cleaner airflow to the engine and ultimately extending the life of the tool.

Another significant characteristic of the 502S is its easy starting system. Shindaiwa has incorporated a reliable starting mechanism that reduces the number of pulls needed to start the engine, saving time and effort during work sessions. Coupled with a low vibration design, this blower not only eases operation but also promotes safer, more comfortable usage.

In conclusion, the Shindaiwa 502S is a standout model in the landscape maintenance arena. With its powerful yet efficient engine, user-friendly design, and advanced features, this blower is well-suited for both residential and commercial applications. Whether it's tackling leaves in the fall or clearing debris after a storm, the Shindaiwa 502S consistently delivers high performance and durability, top choices for those serious about lawn care and landscaping endeavors.
Top Page Image Contents