Canon 1000D, 2762B003 Using a Household Power Outlet, Push in the DC cord, Insert the DC Coupler, Connect the power cord, Connect the DC Coupler DR-E5

Using a Household Power Outlet

With AC Adapter Kit ACK-E5 (sold separately), you can connect the camera to a household power outlet and not worry about the battery level.

1

2

3

4

Connect the power cord.

Connect the power cord as shown in the illustration.

After using the camera, unplug the power plug from the power outlet.

Connect the DC Coupler DR-E5.

Connect the cord’s plug to the DC Coupler DR-E5.

Insert the DC Coupler.

Open the cover and insert the DC Coupler until it locks in place.

Push in the DC cord.

Open the DC cord hole cover and install the cord as shown.

Close the cover.

Do not connect or disconnect the power cord while the camera’s power switch is set to <1>.

163