Canon 1000D, 2762B003 Mounting and Detaching a Lens, Mounting a Lens, Remove the caps, 2 Attach the lens, switch to <AF> (autofocus), 3 On the lens, set the focus mode

Mounting and Detaching a Lens

Mounting a Lens
	1	Remove the caps.
		Remove the rear lens cap and the
		body cap by turning them as shown
		by the arrow.
EF-S lens mount index	2 Attach the lens.
		Align the EF-S lens with the camera’s
		white EF-S lens mount index and turn
		the lens as shown by the arrow until it
		clicks in place.
		When attaching a lens other than an
EF lens mount index		EF-S lens, align the lens with the red
		EF lens mount index.
	3 On the lens, set the focus mode
		switch to <AF> (autofocus).
		If it is set to <MF> (manual focus),
		autofocus will not operate.

4 Remove the front lens cap.

Do not look at the sun directly through any lens. Doing so may cause loss of vision.

If the front part (focusing ring) of the lens rotates during autofocusing, do not touch the rotating part.

33