1. Manuals
  2. Brands
  3. Kitchen Appliance
  4. Cooking
  5. Samsung
  6. Kitchen Appliance
  7. Cooking

Samsung MS23F301TAS NEVER, Clean, NEVER, DO NOT, •Accumulate, •Broken hinge, •Deteriorated seals, (Swing heater model only), •Distorted or bent oven casing, Reason :

MS23F301TAK/LI, MS23F301TAK/OL, MS23F301TAK/ZA, MS23F301TAS/EO, MS23F301TAS/LI, MS23F301TAS/OL, MS23F301TAW/OL

1 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 240
Download on canonical page 240 pages, 0 b

2.Remove any splashes or stains on the inside surfaces of oven with a soapy cloth. Rinse and dry.

3.To loosen hardened food particles and remove smells, place a cup of diluted lemon juice in the oven and heat for ten minutes at maximum power.

4.Wash the dishwasher-safe plate whenever necessary. DO NOT spill water in the vents. NEVER

use any abrasive products or chemical solvents.Take particular care when cleaning the door seals to ensure that no particles:

AccumulatePrevent the door from closing correctly

Clean the microwave oven cavity right after each use with a mild detergent solution, but let the microwave oven cool down before cleaning in order to avoid injury.

When cleaning the upper part inside the cavity, it will be convenient to turn heater downward by 45 ° and clean it.

(Swing heater model only)STORING AND REPAIRING YOUR MICROWAVE OVEN

A few simple precautions should be taken when storing or having your microwave oven serviced.

The oven must not be used if the door or door seals are damaged:Broken hingeDeteriorated sealsDistorted or bent oven casingOnly a qualified microwave service technician should perform repair

NEVER remove the outer casing from the oven. If the oven is faulty and needs servicing or you are in doubt about its condition:

• Unplug it from the wall socket• Contact the nearest after-sales service centre

If you wish to store your oven away temporarily, choose a dry, dustfree place. Reason : Dust and damp may adversely affect the working parts in the oven.

7

ENGLISH

MS23F301TAS_OL_DE68-04182L-01_EN.indd 7

2013-07-27 �� 3:11:03

MENU

Models

Contents