3Com WL-603 manual On the VPN Tunnel Parameter screen, Set the VPN Tunnel Type to IPSec

VPN 119

Figure 96 Add New VPN Tunnel Configuration Screen

On the VPN Tunnel Parameter screen,

1Set the VPN Tunnel Type to IPSec.

2Enter a descriptive name for the tunnel in the Tunnel Name field.

3Remote VPN Gateway - select IP address, and then enter the IP address in the IP Address/Host Name field. If you select ANY, then it would be no need to enter the IP address, as any remote server can be used.

4At the Remote Party ID drop-down list, select either IP_IPV4_ADDR or

ID_USER_FQDN. This information must be entered identically on the IPSec software installed on the client’s machine.

If IP_IPV4_ADDR is selected, then enter the IP address and subnet mask in the Remote Network Address, and Remote Subnet Mask fields. The remote network address is usually the network address of the LAN connected to the remote server.

If ID_USER_FQDN is selected, then enter the name for the Remote Party ID in the text box area next to the drop-down menu. This name must be unique for each connection rule that you create. Enter the IP address and subnet mask in the Remote Network Address, and Remote Subnet Mask fields.

Note that if you select IKE Main Mode from the Key Management drop-down menu (see step 6), you must enter IP_IPV4_ADDR here.