Powering Up the Router 23

Mounting To wall mount the unit:

Instructions for

Wood Walls

1Make two holes 98 mm (3.9 in.) apart.

2Fix two suitable screws directly into the wall, leaving their heads 3 mm (0.12 in.) clear of the wall surface. The screws should be at least 20 mm

(0.75 in.) long.

3Remove any connections in the Router and locate it over the screw heads. When in line, gently push the Router on to the wall and move it downwards to secure.

CAUTION: When making connections, be careful not to push the unit up and off the wall.

Powering Up the

 

To power up the Router:

Router

 

 

 

1

Plug the power adapter into the power adapter socket located on the

 

 

back panel of the Router.

 

2

Plug the power adapter into a standard electrical wall socket.

 

 

 

Connecting the

 

The first step for installing your Router is to physically connect it to the

Router

 

telephone socket and then connect it to a computer in order to be able to

 

 

access the Internet. See Figure 6 and Figure 7:

Page 25
Image 25
3Com WL-603 manual Powering Up, Router, Connecting, Instructions for Wood Walls