VPN 123
Figure 100 Add new PPTP VPN Tunnel Screen
1Set the Tunnel Type to PPTP.
2Enter a descriptive name for the tunnel in the Tunnel Name field.
3Enter the User name and Password.
4Enter the Idle Timeout value.
5Set the PPTP Type Setting to PPTP Server, or PPTP Client.
■if you set the type as PPTP Client, then set the Local Type Setting to Network or Host, then enter the Remote Server IP. Check the Auto reconnect box, if you want to
■if the PPTP Type Setting is set to PPTP Server, go to step 6.
6Check the box to enable the Remote Network Setting, and then enter the Remote Network Address, and Remote Subnet Mask information.
7When the PPTP Type Setting is set to PPTP Client, you would then need to enter the
