3Com WL-603 manual To enable 128-bit WEP

Accessing the Setup Wizard 49

2Click Next.

Note that all four WEP keys on each device of the same wireless network must be identical.

128-bit WEP

WEP is the basic mechanism to transmit your data securely over the wireless network. Matching encryption keys must be set up on your Router and wireless client devices to use WEP.

Figure 36 128-bit WEP

To enable 128-bit WEP:

1You can enter the 128-bit WEP key manually, enter your WEP key as 13 pairs of hex digits (0-9, A-F). Or you can generate the 128-bit WEP key automatically, enter a memorable passphrase in the Passphrase box, and then click Generate to generate the hex keys from the passphrase.

2Click Next.

Note that the WEP keys on each device of the same wireless network must be identical. And In 128-bit WEP mode, only one WEP key can be specified.