112 CHAPTER 5: CONFIGURING THE ROUTER
You can configure the Router to send status messages to the SNMP
management agent if a problem occurs on the network. To configure
SNMP traps:
1In the IP Address field, enter the IP address of the PC to which you want
your Router to send status messages.
2In the Community field, enter the name of the SNMP communication
channel to which you want your Router to send status messages.
3Set the Versio n field to match the version of trap messaging that your
SNMP management agent supports. The Router supports V1 and V2c
trap messaging.
Syslog Using third party syslog software, this Syslog Server tool will automatically
download the Router log to the specified server IP address.
Figure 88 Syslog Server Screen
1Check the Enable Syslog Server checkbox.
2Enter the Server LAN IP Address in the space provided.
3Click Apply.