84CHAPTER 5: CONFIGURING THE ROUTER
Routing Mode over ATM
RFC1483/2684 routed encapsulation in routing mode, it carries IP datagrams directly over ATM. DHCP client function can also be enabled to obtain an IP address dynamically.
Figure 64 Routing Mode over ATM Screen
1Select Routing mode over ATM from the protocol
2Enter IP address, Subnet mask, and Default gateway information.
3If your ISP provides DNS information, check the DNS Automatic from ISP box.
4If the ISP requires you to input a Host Name, enter it in the Host Name field.
5If your ISP uses DHCP to automatically assign IP addresses, check the DHCP Client checkbox.
6Check the Add Default Route checkbox to set this PVC as the default route, this is used when you configure more than one PVC for the Router.
7Enter the VPI/VCI values. Or click Auto Search to find out the values.
8Select the Encapsulation, VC MUX or LLC. This information should be provided by your ISP.
