Accessing the Setup Wizard | 43 |
Bridge Mode (for a single PC)
Selecting the Bridge mode sets the device into 1483 bridging mode in which the device connects LANs and WAN together. It operates as a Data Link Layer device that acts to limit the traffic between two network segments by filtering the data between them based on the hardware address.
To set up the Router for use with an RFC1483 bridged connection, use the following procedure:
Figure 29 Bridged Mode Screen
1Enter your VPI and VCI information in the VPI/VCI fields.
2Select the encapsulation type (LLC or VC MUX) in the Encapsulation
Check all of your settings, and then click Next.
The LAN Settings screen will then be displayed (refer to Figure 32).
