44CHAPTER 4: RUNNING THE SETUP WIZARD

Routing Mode over ATM

The Routing Mode over ATM uses fixed/static IP addresses, which are provided by your ISP, to connect to the Internet. Obtain the information on this screen from your ISP.

Figure 30 Routing mode over ATM Screen

1Enter your Internet IP address in the WAN IP field.

2Enter the subnet mask in the Subnet Mask field.

3Enter the default gateway IP address in the Default Gateway field.

4Enter the DNS address in the DNS field.

5Enter your VPI and VCI information in the VPI/VCI fields.

6Select the encapsulation type (LLC or VC MUX) in the Encapsulation drop-down menu. This information should be provided to you by your ISP.

Check all of your settings, and then click Next.

The LAN Settings screen will then be displayed (refer to Figure 32).

Page 46
Image 46
3Com WL-603 manual Routing Mode over ATM, Routing mode over ATM Screen