Agilent Technologies Agilent 35670A manual AGILENT 35670A Supplemental Operator’s Guide

AGILENT 35670A

Supplemental Operator’s Guide

•Enter 4 and press the [ORDERS] softkey (F1).

•Enter 5 and press the [ORDERS] softkey (F1).

•Enter 6 and press the [ORDERS] softkey (F1).

•Enter 7 and press the [ORDERS] softkey (F1).

•Enter 8 and press the [ORDERS] softkey (F1).

•Enter 9 and press the [ORDERS] softkey (F1).

•Enter 10 and press the [ORDERS] softkey (F1).

After the data table is built, it can be saved to disk with the following steps:

•Insert a 3.5” diskette into the AGILENT 35670A

•Press the [Save/Recall] hardkey.

•Press the [SAVE MORE] softkey (F3).

•Press the [SAVE DATA TABL] softkey (F4).

•Press the [ENTER] softkey (F1) to save the data table to the default filename “DATA1.TBL”

•“DATA1.TBL” can be recalled later to set up the structure of the data table.

To start taking measurements,

•Press the yellow [Start] hardkey.

Marker	Trace: A				X Ref: 0
Date: 10-02-96 Time: 09:36:00 PM					Y Ref: 100 u
A: CH1 Pwr Spec		X:2	Order		Y:837.946 uVrms
	Entry Label				Order		Vrms
				1		4.797	u
				2		837.946	u
				3		21.182	u
				4		96.302	u
				5		21.047	u
				6		59.76	u
LogMag				7		21.843	u
				8		154.291	u
				9		58.746	u
				10		360.559	u

34