AGILENT 35670A
Supplemental Operator’s Guide
Section 23 : Recalling Trace Data From 3.5” Disk or
Recall trace data from a file in
Recall Trace From 3.5” Disk
To recall data from a file named “T1.DAT” on a 3.5” disk into data register D1, follow these steps:
•Insert the 3.5” disk containing the data file into the AGILENT 35670A.
•Press the [Save/Recall] hardkey.
•Press the [DEFAULT DISK] softkey (F9).
•Press the [INTERNAL DISK] softkey (F3).
View the contents of the 3.5” disk by turning on the catalog
•Toggle the [CATALOG ON OFF] softkey (F9) until ON is highlighted.
Return to the Trace view
•Toggle the [CATALOG ON OFF] softkey (F9) until OFF is highlighted.
Set up display format to view data register D1
•Press the [Disp Format] hardkey.
•Press the [SINGLE] softkey (F1).
•Press the [Active Trace] hardkey.
•Press the [A] softkey (F1).
•Press the [Scale] hardkey.
•Toggle the [AUTOSCALE ON OFF] softkey (F1) until ON is highlighted..
•Press the [Meas Data] hardkey.
•Press the [MORE CHOICES] softkey (F9).
•Press the [DATA REGISTER] softkey (F8).
•Press the [D1] softkey (F1).
Recall the Data into data register D1
•Press the [Save/Recall] hardkey.
•Press the [RECALL DATA] softkey (F4).
• | Press the | [RCL TRACE | AND SCALE] softkey (F1). |
• | Press the | [FROM FILE | INTO D1] softkey (F1). |
•Press the [CLEAR ENTRY] softkey (F9).
•Enter T1.DAT and then press the [ENTER] softkey (F1)
Recall Trace Data from Non-Volatile RAM (NV-RAM)
To recall data from a file stored in
•Press the [Meas Data] hardkey.
•Press the [MORE CHOICES] softkey (F9).
65