Manuals / Agilent Technologies / Home Audio / Stereo System

Agilent Technologies Agilent 35670A manual Viewing Results Using Real and Imaginary Traces

Models: Agilent 35670A

1 82

Download 82 pages 27.58 Kb

Page 58

Viewing Results Using Real and Imaginary Traces

AGILENT 35670A

Supplemental Operator’s Guide

•Press the [Disp Format] hardkey.

•Press the [SINGLE] softkey (F1)

•Press the [Active Trace] hardkey.

•Press the [ A ] softkey (F1).

•Press the [Trace Coord] hardkey.

•Press the [MORE CHOICES] softkey (F6).

•Press the [NYQUIST DIAGRAM] softkey (F4).

Trac Coord	A: Nyquist		B: Phase
[FFT]	C: Real		D: Real
Date: 10-02-96 Time: 09:49:00 PM
A: Freq Resp2/1		R:-117.6 e-3	I:-101.3 e-3 +j	X:262 Hz
200
e-3

Imag

Nyquist

50

/dive--31

-300 e-3

-366.456e-3	Real	-j	266.456e-3
		AVG: 10

+1

Viewing Results Using Real and Imaginary Traces

View frequency response measurements using real and imaginary coordinates as follows:

•Press the [Disp Format] hardkey.

•Press the [UPPER/LOWER] softkey (F3).

•Press the [Active Trace] hardkey.

•Press the [ AB ] softkey (F5).

•Press the [Meas Data] hardkey.

• Press the [FREQ RESP 2 / 1] softkey (F6).

•Press the [Scale] hardkey.

54

Image 58

Agilent Technologies Agilent 35670A manual Viewing Results Using Real and Imaginary Traces

Contents

for the Agilent 35670A Dynamic Signal Analyzer Supplemental Operator’s GuideAGILENT 35670A Supplemental Operator’s Guide SECTION 13 ORDER DOMAIN RESULTS IN LIST MODE SECTION 24 PLOTTING AND PRINTING TRACE DATA Section 1 Turning On the AGILENT 35670A Trac Coord Coord A Inst ModeMeas Data FreqUsing Transducers with External Preamplifiers Using ICP-TypeTransducers with the AGILENT 35670ASection 3 Measuring with Transducers Specifying Transducer Sensitivity and Units Selecting Single Channel Operation Setting Up Transducer Units for DisplacementSelecting Frequency Span Frequency Spans Available for the AGILENT 35670A Quantifying Power Spectrum Results Maximizing Dynamic Range Frequency Zooming to Increase ResolutionSection 5 Improving Measurement Results Averaging to Reduce Measurement Variance AGILENT 35670A Supplemental Operator’s Guide AGILENT 35670A Supplemental Operator’s Guide Selecting Single Channel OperationSelecting Time Record Length Displaying Time WaveformsEvent Triggering Quantifying Time Trace Results Section 7 Measuring Dual Channel Spectra Presetting the AnalyzerSelecting Dual Channel Operation Selecting Frequency SpanUsing Markers with Dual Channel Measurements Coupled Markers Coupled Markers with Peak TrackingDual Channel Averaging Maximizing Dynamic RangeAGILENT 35670A Supplemental Operator’s Guide Selecting Dual Channel Operation Displaying Dual Time WaveformsSection 9 Measuring Dual Channel Time Waveforms Selecting Time Record LengthArming Dual Channel Time Measurements Triggering a Dual-ChannelTime MeasurementTrigger Delay Using Markers with Dual Channel Time Measurements AGILENT 35670A Supplemental Operator’s Guide Setting Up the Transducer Parameters Choosing a Preliminary Frequency Span Setting Up Input RangeSpecifying Trigger Parameters Setting Up Time Displays WAITING FOR CH 1 TRIGGERUsing Force/Response Windows Displaying Hammer Test Results AveragingAGILENT 35670A Supplemental Operator’s Guide Changing Frequency Span Delay = 01.T ForceWidth = T ExponentialDecay = TAGILENT 35670A Supplemental Operator’s Guide Prepare the order display as follows AGILENT 35670A Supplemental Operator’s GuideSection 13 Order Domain Results in List Mode Prepare the order results list as followsAGILENT 35670A Supplemental Operator’s Guide To start taking measurementsSelecting Measurement Parameters Recalling the Spectra from Disk Recalling the Spectra from Non-VolatileRAMScaling the Displays Using Markers to Compare Selecting Single Channel Operation Setting Up the Waterfall DisplaySection 15 Waterfall Spectra at Time Intervals Selecting Measurement ParametersSetting Up Time Step Arm Using Slice Markers with Waterfall DataAGILENT 35670A Supplemental Operator’s Guide Specifying the Start RPM Setting Up the TachometerSection 16 Waterfall Spectra at RPM Intervals Starting and Pausing a Measurement Scaling the DisplayAGILENT 35670A Supplemental Operator’s Guide Accelerometer Polarity Set up triggering on Channel 1 to 5% of range AGILENT 35670A Supplemental Operator’s GuideFor accelerometers with the same polarity Set up the AGILENT 35670AAGILENT 35670A Supplemental Operator’s Guide For accelerometers with opposite polaritySet up trace coordinates as peak-to-peakmil Set up displayAGILENT 35670A Supplemental Operator’s Guide AGILENT 35670A Supplemental Operator’s Guide AGILENT 35670A Supplemental Operator’s Guide Connect the transducers Preset the AGILENT 35670AAGILENT 35670A Supplemental Operator’s Guide Enter Channel 1 input parametersAGILENT 35670A Supplemental Operator’s Guide Set up display parametersChoose measurement parameters AGILENT 35670A Supplemental Operator’s Guide Viewing Results Using Real and Imaginary Traces AGILENT 35670A Supplemental Operator’s GuideAssessing Measurement Quality Set up Trace B to measure velocity in inch/s 0-pk Preset the AGILENT 35670AAGILENT 35670A Supplemental Operator’s Guide Press the Y UNITS softkey F8 AGILENT 35670A Supplemental Operator’s GuidePress the Trace Coord hardkey Press the XDCR UNIT CONVERT softkey F4AGILENT 35670A Supplemental Operator’s Guide When the run-upand run-downis completed AGILENT 35670A Supplemental Operator’s GuideSpecify User Levels for Triggering Characterizing the External TriggerCharacterize the Trigger Signal Setting Up External TriggerAcquire and Display the Trigger Signal Set up a non-TTLtrigger as followsSet up measurement parameters AGILENT 35670A Supplemental Operator’s GuideConfirming Contents of 3.5” Disk File Saving Trace to 3.5” DiskAGILENT 35670A Supplemental Operator’s Guide Confirming Contents of NV-RAMSaving Trace to Non-VolatileRAM NV-RAM To return to the Trace viewRecall Trace From 3.5” Disk Recall Trace Data from Non-VolatileRAM NV-RAMAGILENT 35670A Supplemental Operator’s Guide Plotting the Display Generating Output with the AGILENT 35670ASection 24 Plotting and Printing Trace Data Check the Plot/Print Destination Printing the DisplayAGILENT 35670A Supplemental Operator’s Guide Plot the TraceSection 25 Importing Plots into Microsoft Word Plot to a File Using the AGILENT 35670A Section 28 Precautions to Prevent Loss of Data Measuring Acceleration, Displaying Displacement Math Functions and XDCR UNIT CONVERT Converting Frequency Response Units to ComplianceAGILENT 35670A Supplemental Operator’s Guide Now display the function F1 on Trace BAGILENT 35670A Supplemental Operator’s Guide AGILENT 35670A Supplemental Operator’s Guide above the track numberSection Section