AGILENT 35670A
Supplemental Operator’s Guide
Section 22 : Saving Trace Data to a 3.5” Disk or
Save trace data into
Saving Trace to 3.5” Disk
To store Trace A data as a file named “T1.DAT” on a 3.5” disk, insert a
•Press the [Active Trace] hardkey.
•Press the [ A ] softkey (F5).
•Press the [Save/Recall] hardkey.
•Press the [SAVE DATA] softkey (F1).
•Press the [SAVE TRACE] softkey (F1).
•Press the [INTO FILE] softkey (F9).
•Press the [CLEAR ENTRY] softkey (F9).
•Enter T1.DAT and then press the [ENTER] softkey (F1)
Note that the AGILENT 35670A automatically increments a numeric ending to a file name. To store Trace B data to a file named “T2.DAT”:
•Press the [Active Trace] hardkey.
•Press the [ B ] softkey (F5).
•Press the [Save/Recall] hardkey.
•Press the [SAVE DATA] softkey (F1).
•Press the [SAVE TRACE] softkey (F1).
•Press the [INTO FILE] softkey (F9).
•T2.DAT will be the default name
•Press the [ENTER] softkey (F1)
Confirming Contents of 3.5” Disk File
To confirm that data was stored on disk successfully, view the contents of the disk with the catalog command:
•Press the [Save/Recall] hardkey.
•Toggle the [CATALOG ON OFF] softkey (F8) until ON is highlighted.
The entire contents and file details of the disk are displayed. To return to the trace view:
•Toggle the [CATALOG ON OFF] softkey (F9) until OFF is highlighted.
63