9
USB INSTANT DVD INSTALLATION
USB Instant DVD Installation Guide

Getting Started

1. Check USB Instant DVD Contents

Hardware:
(A) USB Instant DVD device
(B) 5 VDC Power supply
(C) 6 ft. USB Cable
(D) 6 ft. A/V In cable (RCA video and Audio to
RCA video and 3.5 mm stereo)
(E) 6 ft. 3.5 mm male to 3.5 mm male stereo
audio cable
(F) 9 ft. Audio out to TV/VCR cable (3.5 mm
stereo w/female 3.5mm Y to R+L RCA audio)
(G) 9 ft. RCA Video cable
Instant DVD CD containing:
- Capture Wizard Capture & Export utility
- USB Instant DVD device drivers
- Ulead VideoStudio 6 – Special full version
customized for Instant DVD
- Sonic MyDVD 3.5
- Cyberlink PowerDVD 4.0
- Neptune MediaShare 3.0
- Ulead DVD PictureShow
- Quick Time player
- Intel Celeron 500 MHz or AMD Athlon 600 MHZ or better
- Windows 98, Win98SE, WinME, Win2000 or WinXP
- 128 MB recommended
- Full duplex sound card
- 16 MB AGP video card
- CD-ROM Drive
- 150 MB hard disk space for capture/editing
applications
- Disk space for video captures; Video captured at
4 Mb/sec will use 1.8 GB per hour
- CD Recordable Drive & software required for saving
movie files onto a CD
- DVD Recordable Drive & software required for
recording DVD movies.

System Requirements

The basic steps are:
1. Check USB Instant DVD
package contents
2. Wire it Up!- audio and video connectors
3. Plug it In!- Power and USB connection
Install Device Drivers & Application
software
4. Optimize System For Best Performance
5. Verify Hardware Installation
6. Set Windows Audio Mixer
7. Installation Summary & Diagram
Optimize System For Best Performance
8. Start Making DVD Movies!
CapWiz manual.p65 6/4/2002, 12:21 PM9