271
Setting up the Printer as an ATPS Remote Printer
10 Select the Perform Lookup option and press Enter.
11 In the list of installed printers, locate and select the newly installed printer from the list.
(It should be identified as “Color LaserWriter 12/600 PS.”)
12 If necessary, edit the Spooler’s AppleTalk Name field and press Esc to complete the
setup.
Note: You can also edit information about the print server or spooler. See the
documentation provided with NetWare for more information.
13 Press Esc to exit the utility.
The NetWare for Macintosh Configuration screen appears.
14 Select Edit SYS:\SYSTEM\AUTOEXEC.BAT from the list of options and press Enter.
A window appears, displaying the file’s contents.
15 Insert the following line after the
load afp
statement:
load atps
This command instructs the NetWare server to load the ATPS service
automatically at startup time.
16 Press Esc until the Install utility quits.
17 At the system console prompt, type
load atps
and press Enter.
The service is loaded and immediately becomes available to network users.
A message appears confirming the loading, and the console returns to the
command line prompt.