Apple 12/600PS manual Enter information into the remote printer form, as follows

6 Enter information into the remote printer form, as follows:

mPrinter queue name Type the local queue name users will use as the name for the printer.

mRemote system name Type the IP name assigned to the printer as described in “Step 3: Assigning an IP Address to the Printer,” earlier in this chapter.

mRemote printer queue name Type the local queue name users will use as the name for the printer.

mRemote cancel model Used for remote printer job removal; type rcmodel

mRemote status model Used for remote printer queue status; type rsmodel

mMake this the system default printer? (y or n) Type y to make this printer the default printer for all workstations on this segment of the network.

mPrinter class Optional

mRestrict cancel Optional

mRemote printer on a BSD system? (y or n) Because this printer is a Berkeley- style remote printer, type y

7Choose Perform Task from the SAM menu.

8To enable the print queue you just created, choose the following items from the SAM menu, in order:

Peripheral Devices Printers and Plotters Enable a Printer

9When SAM asks for the printer name, type the IP name assigned to the printer as described in “Step 3: Assigning an IP Address to the Printer,” earlier in this chapter.

10Leave SAM.

11Start the LP request scheduler by typing

/usr/lib/lpsched

12Test printing with the following command: lp -dprinter_queue_name filename

122 Chapter 4