Changing TCP/IP configurations

You can specify the IP address of the printer. For information about

determining the printer’s IP address and setting up the printer on a TCP/IP

network, see Chapter 4.

1Open the Communication Configuration category.

You see a list of communication settings options.

2Open the TCP/IP Configuration category.

3In the panel that appears, make the changes you want.

68 Chapter 2
Type the IP address here.
Drag the slider to
change the printer’s
subnet mask.
IP address of the default
gateway used for sending
packets off the local network
The IP address and
subnet mask of hosts
that have access to
this printer appear
here. (No more than
16 in the list.) To remove a host or network of hosts from the
access list, click its name, then click Remove. To add to the list, click Add.
For information about the dialog box that
appears, see the next page.