Apple 12/600PS manual Use only transparencies recommended

IMPORTANT Insert transparencies so the white strip goes into the printer first. Some transparencies have short strips that don’t extend fully across the page. Align these transparencies with the short strip on the left-hand side of the stack. Inserting transparencies incorrectly causes them to jam.

Slide the width guides so they rest against the transparencies. If the transparencies bow out even slightly, the guides are too tight.

	Load transparencies so the white strip
	goes into the printer first.
	If a transparency has a partial strip, align
	the strip on the left as it goes into the printer.
	If a transparency has a full-width paper strip,
Use only transparencies recommended	make sure the paper side is up as it goes
for use in the Color LaserWriter 12/600 PS.	into the printer.

Loading Paper 211