Check the status panel to see which toner color is running low. Then take that cartridge out, rock it gently back and forth a few times (as described in the cartridge installation procedure) to redistribute the toner, and reinsert the cartridge. If the light goes out, you can continue to use the same cartridge. It’s probably a good idea, however, to order or purchase a replacement cartridge after this kind of early warning.

If the light stays on, change the cartridge. Instructions for replacing a cartridge come in the package with the new cartridge.

IMPORTANT Use only an Apple Color LaserWriter Toner Cartridge with the Color LaserWriter 12/600 PS.

Note: Don’t throw away used toner cartridges. See the instructions that come with your new cartridge for information on how to return the used cartridge to the manufacturer. By returning used cartridges, you help reduce waste and preserve the environment.

Low fuser oil

When the bottle containing fuser oil is nearly empty, the Alert and fuser oil lights glow. (When the fuser oil compartment is empty, the printer stops working until you replace the oil.)

M C

Bk Y

 

!

When fuser oil is low, the Alert

Fuser oil

and fuser oil lights glow.

 

For information about ordering the replacement supplies, see Appendix A.

Instructions for replacing the fuser oil come in the package with the new bottle of fuser oil.

Maintenance 219

Page 242
Image 242
Apple 12/600PS manual Low fuser oil