Initializing the hard disk

If you attach a hard disk to the printer to store fonts, you must initialize it (if it is not already in Apple HFS format) before you can use it. You can do so by following the steps below.

WARNING Initializing the hard disk erases all the data on it. Initialize the hard disk only if you’re sure it’s new or if it’s OK to erase it.

1From the Program Manager, open the Control Panel.

2Double-click the Printers icon to display the Printers dialog box.

3If it’s not already selected, select the Color LaserWriter 12/600 PS from the Installed Printers list.

4Click Setup.

The Setup dialog box appears.

Note: You can also open the Setup dialog box from within many Windows programs. Check your program documentation to see if you can change your printer setup from within your program.

5Click the Fonts tab.

6Click Font Downloader.

The Font Downloader dialog box appears.

7Click Other.

A dialog box opens.

8Click the Format Device button, then click OK.

9Select the disk name and click OK.

Initializing the hard disk takes a few minutes. The Ready/In Use light on the printer blinks until initialization is complete.

Windows and DOS Users

195

Page 220
Image 220
Apple 12/600PS manual Initializing the hard disk, Click the Fonts tab Click Font Downloader, Click Other