Fuser needs replacement

When the fuser is worn out, the Alert and fuser lights glow. As the fuser approaches the end of its life, the status panel shows a warning, prompting you to order a replacement kit. When the fuser is completely worn out, the printer stops working.

For information about ordering replacement supplies, see Appendix A.

Fuser

M C

Bk Y

!

When the fuser is wearing out, the

Alert and fuser lights glow.

In Appendix F you’ll find instructions for replacing the fuser, together with a transfer drum cleaning unit, a separation discharger, an ozone filter, and an air filter.

Cleaning the exterior

Unplug the power cord and then wipe the exterior of the printer with a clean, dry towel or lint-free paper. Don’t allow lint or foreign liquids inside the printer.

Use a mild soap or detergent if necessary, but never use an ammonia-based cleaner. Be careful not to get any liquid in the power cord port or anywhere inside the printer.

WARNING Never use ammonia-based cleaners on or around the Color LaserWriter 12/600 PS. They may react chemically with the toner and with the printer’s plastic case.

222

Chapter 10

Page 245
Image 245
Apple 12/600PS manual Fuser needs replacement, Cleaning the exterior