Apple 12/600PS Initializing a hard disk connected to the printer, Click Initialize to proceed

1

2

3

Select the disk you want to initialize.

Initializing a hard disk connected to the printer

If you connect an internal or external hard disk to the printer, you need to initialize the disk before you can download fonts to it. (See Chapter 5 for information about connecting hard disks to the printer.)

The Color LaserWriter 12/600 PS printer recognizes disks formatted for use with the Macintosh hierarchical file system (HFS) format. The printer will not recognize disks using other formats. If you connect a disk that is not formatted for HFS, you will need to reinitialize the disk and then reload any fonts from your computer.

IMPORTANT Reinitializing erases all fonts previously stored on the disk.

Open the Printer Preferences category.

Open the Disks category.

In the panel that appears, select the disk you want to initialize and click Initialize.

If you turn on a disk after you turn on the printer, the disk appears as “unmounted.” (To mount the disk properly, you must restart the printer.)

If you don’t turn on a disk, it won’t appear in this panel.

A message warns that initializing erases the entire contents of the disk— including any fonts.

4Click Initialize to proceed.

It takes some time to complete the initialization process. The printer won’t be available for printing until the hard disk is initialized.

58Chapter 2