Important safety in structions
Before you plug in your printer, read these important safety instructions.
For your own safety and that of your equipment, always take the following
precautions.
If any of the following conditions exists, disconnect the power plug (by
pulling the plug, not the cord):
mthe power cord or plug becomes frayed or otherwise damaged
myou spill something into the case
myour printer is exposed to rain or any other excess moisture
myour printer has been dropped or the case has been otherwise damaged
myou suspect that your printer needs service or repair
myou want to clean the case (use only the recommended procedure
described in Chapter 10)
WARNING
This equipment is intended to be electrically grounded. Your
printer is equipped with a three-wire grounding plug—a plug that has a
third (grounding) pin. This plug will fit only a grounded AC outlet. This
is a safety feature. If you are unable to insert the plug into the outlet,
contact a licensed electrician to replace the outlet with a properly
grounded outlet. Do not defeat the purpose of the grounding plug!
4Chapter 1