Apple 12/600PS manual Setting up job handling, You see a list of network options

Setting up job handling

You can set job handling for individual network protocols that you use. If you need to shut down the printer in the middle of printing a document, you can use this panel to make sure the printer finishes the job before closing the connection.

1Open the Job Defaults category.

You see a list of network options.

2Open the Job Handling Configuration category.

3Click the checkboxes next to the network types to specify when the connection with the computer should be broken.

With this feature on, the printer keeps the connection open until the last page of a job has printed. That way, if a problem develops at the end of the print job, the printer can send error messages to alert users to the problem. Turning the feature on does make the total print time for the job somewhat longer, and the printer prints jobs serially.

An X in a checkbox means the printer prints all pages in a job before closing the connection with the computer that requested the print job.

4 To send the job-handling configuration settings to the printer, click Send.

62Chapter 2