4In the dialog box that appears, click a font to select it, then click Add.

The Fonts folder (inside the System Folder) is one place to find fonts.

Click a font, then click Add. (Or double-click the font.)

Fonts you add are gathered here until you click Send.

If you change your mind, you can select fonts and click Remove.

(Or click Remove All and start over.)

5Use the Destination pop-up menu to choose a destination for the fonts. You can send fonts to the printer’s RAM.

If you have installed an internal hard disk, its SCSI ID is 0 (zero). You can choose 0 and send fonts to the internal hard disk.

If you have an external hard disk connected to the printer, you can choose its SCSI ID and send fonts to the hard disk.

Fonts you send to the printer’s RAM are lost whenever the printer is turned off, whereas fonts sent to the printer’s hard disk are not lost when the printer is turned off.

6 Click Send.

56Chapter 2

Page 81
Image 81
Apple 12/600PS manual Fonts you add are gathered here until you click Send