Manuals / Agilent Technologies / Home Audio / Stereo System

Agilent Technologies Agilent 35670A manual Plot to a File Using the AGILENT 35670A

Models: Agilent 35670A

1 82

Download 82 pages 27.58 Kb

Page 74

AGILENT 35670A

Supplemental Operator’s Guide

Plot to a File Using the AGILENT 35670A

The AGILENT 35670A has the ability to route plotter output to a file. If the file is named with a “.HGL” file extension, then Word will recognize this file immediately as an HP Graphics Language file.

Set up plotter output to a file

•Press the [Plot/Print] hardkey.

•Press the [PLOT/PRNT DESTINATN] softkey (F4).

•Select the [OUTPUT TO FILE] softkey (F4).

•Press the [OUTPUT FILENAME] softkey (F5).

•Press the [CLEAR ENTRY] softkey (F9).

•Enter P1.HGL and then press the [ENTER] softkey (F1)

Insert a 3.5” Disk into the AGILENT 35670A and ensure DEFAULT DISK is

INTERNAL DISK:

•Press the [Save/Recall] hardkey.

•Press the [DEFAULT DISK] softkey (F9).

•Press the [INTERNAL DISK] softkey (F3).

Plot to file “P1.HGL”

•Prepare Trace Titles and Plot Titles as described in the section “Plotting and Printing Trace Data.”

•Press the [Plot/Print] hardkey.

•Press the [START PLOT] softkey (F1).

Inserting Picture of an HP-GL Plot File Into a MS Word document.

To import the plot file into the Word document, follow these steps:

•Insert the 3.5” disk with the plot file “P1.HGL” into a PC.

•Open a Word document

•Select Insert Picture

•Click on the “Look in” arrow to change directories

•Select A: (3½ Disk)

•Double-Click on file “P1.HGL”

•Word will automatically detect that it is an HP-GL file, because of the

.HGL file extension, and import the graphic directly.

70

Image 74

Agilent Technologies Agilent 35670A manual Plot to a File Using the AGILENT 35670A

Contents

for the Agilent 35670A Dynamic Signal Analyzer Supplemental Operator’s GuideAGILENT 35670A Supplemental Operator’s Guide SECTION 13 ORDER DOMAIN RESULTS IN LIST MODE SECTION 24 PLOTTING AND PRINTING TRACE DATA Section 1 Turning On the AGILENT 35670A Trac Coord Coord A Inst ModeMeas Data FreqSection 3 Measuring with Transducers Using ICP-TypeTransducers with the AGILENT 35670AUsing Transducers with External Preamplifiers Specifying Transducer Sensitivity and Units Selecting Frequency Span Setting Up Transducer Units for DisplacementSelecting Single Channel Operation Frequency Spans Available for the AGILENT 35670A Quantifying Power Spectrum Results Section 5 Improving Measurement Results Frequency Zooming to Increase ResolutionMaximizing Dynamic Range Averaging to Reduce Measurement Variance AGILENT 35670A Supplemental Operator’s Guide AGILENT 35670A Supplemental Operator’s Guide Selecting Single Channel OperationSelecting Time Record Length Displaying Time WaveformsEvent Triggering Quantifying Time Trace Results Section 7 Measuring Dual Channel Spectra Presetting the AnalyzerSelecting Dual Channel Operation Selecting Frequency SpanUsing Markers with Dual Channel Measurements Coupled Markers Coupled Markers with Peak TrackingDual Channel Averaging Maximizing Dynamic RangeAGILENT 35670A Supplemental Operator’s Guide Selecting Dual Channel Operation Displaying Dual Time WaveformsSection 9 Measuring Dual Channel Time Waveforms Selecting Time Record LengthArming Dual Channel Time Measurements Triggering a Dual-ChannelTime MeasurementTrigger Delay Using Markers with Dual Channel Time Measurements AGILENT 35670A Supplemental Operator’s Guide Setting Up the Transducer Parameters Specifying Trigger Parameters Setting Up Input RangeChoosing a Preliminary Frequency Span Setting Up Time Displays WAITING FOR CH 1 TRIGGERUsing Force/Response Windows Displaying Hammer Test Results AveragingAGILENT 35670A Supplemental Operator’s Guide Changing Frequency Span Delay = 01.T ForceWidth = T ExponentialDecay = TAGILENT 35670A Supplemental Operator’s Guide Prepare the order display as follows AGILENT 35670A Supplemental Operator’s GuideSection 13 Order Domain Results in List Mode Prepare the order results list as followsAGILENT 35670A Supplemental Operator’s Guide To start taking measurementsSelecting Measurement Parameters Recalling the Spectra from Disk Recalling the Spectra from Non-VolatileRAMScaling the Displays Using Markers to Compare Selecting Single Channel Operation Setting Up the Waterfall DisplaySection 15 Waterfall Spectra at Time Intervals Selecting Measurement ParametersSetting Up Time Step Arm Using Slice Markers with Waterfall DataAGILENT 35670A Supplemental Operator’s Guide Section 16 Waterfall Spectra at RPM Intervals Setting Up the TachometerSpecifying the Start RPM Starting and Pausing a Measurement Scaling the DisplayAGILENT 35670A Supplemental Operator’s Guide Accelerometer Polarity Set up triggering on Channel 1 to 5% of range AGILENT 35670A Supplemental Operator’s GuideFor accelerometers with the same polarity Set up the AGILENT 35670AAGILENT 35670A Supplemental Operator’s Guide For accelerometers with opposite polarityAGILENT 35670A Supplemental Operator’s Guide Set up displaySet up trace coordinates as peak-to-peakmil AGILENT 35670A Supplemental Operator’s Guide AGILENT 35670A Supplemental Operator’s Guide Connect the transducers Preset the AGILENT 35670AAGILENT 35670A Supplemental Operator’s Guide Enter Channel 1 input parametersChoose measurement parameters Set up display parametersAGILENT 35670A Supplemental Operator’s Guide AGILENT 35670A Supplemental Operator’s Guide Viewing Results Using Real and Imaginary Traces AGILENT 35670A Supplemental Operator’s GuideAssessing Measurement Quality AGILENT 35670A Supplemental Operator’s Guide Preset the AGILENT 35670ASet up Trace B to measure velocity in inch/s 0-pk Press the Y UNITS softkey F8 AGILENT 35670A Supplemental Operator’s GuidePress the Trace Coord hardkey Press the XDCR UNIT CONVERT softkey F4AGILENT 35670A Supplemental Operator’s Guide When the run-upand run-downis completed AGILENT 35670A Supplemental Operator’s GuideSpecify User Levels for Triggering Characterizing the External TriggerCharacterize the Trigger Signal Setting Up External TriggerAcquire and Display the Trigger Signal Set up a non-TTLtrigger as followsSet up measurement parameters AGILENT 35670A Supplemental Operator’s GuideConfirming Contents of 3.5” Disk File Saving Trace to 3.5” DiskAGILENT 35670A Supplemental Operator’s Guide Confirming Contents of NV-RAMSaving Trace to Non-VolatileRAM NV-RAM To return to the Trace viewRecall Trace From 3.5” Disk Recall Trace Data from Non-VolatileRAM NV-RAMAGILENT 35670A Supplemental Operator’s Guide Section 24 Plotting and Printing Trace Data Generating Output with the AGILENT 35670APlotting the Display Check the Plot/Print Destination Printing the DisplayAGILENT 35670A Supplemental Operator’s Guide Plot the TraceSection 25 Importing Plots into Microsoft Word Plot to a File Using the AGILENT 35670A Section 28 Precautions to Prevent Loss of Data Measuring Acceleration, Displaying Displacement Math Functions and XDCR UNIT CONVERT Converting Frequency Response Units to ComplianceAGILENT 35670A Supplemental Operator’s Guide Now display the function F1 on Trace BAGILENT 35670A Supplemental Operator’s Guide AGILENT 35670A Supplemental Operator’s Guide above the track numberSection Section