Alesis QS7.1, QS8.1 manual Pitch Level, Delay Level, Range of Settings 00 to Config

Part 6: Editing Effects

[120]— EFFECT MIX

Not to be confused with an actual Mix or Mix mode, the Effect’s Mix function is where you can mix the various signal levels of all the effects to the Main Left and Right outputs of the QS. Each Effect send has a separate Mix page for any effect module that feeds the main outputs. If an Effect send has no effect modules due to the Configuration, or if a particular Effect module isn’t available on that Send, you’ll see the message NOT IN CONFIG.

Note that the Mix page doesn’t control how much the individual effect modules feed to each other; only how much they feed to the Main outputs.

This is what you’ll see on page 1 of the Mix function for Send 1 in Configurations 1 and 4. Depending on the selected Configuration and Send, you may see something different on page 1. This is because the order and availability of the effects differs from one Configuration to the next. For example: for Send 1 in Configuration #1, the order reads Pitch, Delay, Reverb; but in Configuration #2, the order of effects for Send 1 is Delay, Pitch, Reverb.

PITCH LEVEL

Range of Settings: 00 to 99	Page 1	Config. 1 and 4
	Page 2	Config. 2 and 5

Adjusting this value will cause the Pitch Output Level for that Send to increase or decrease. Even if this parameter is set to 00, the output of the Pitch section can still feed other Effect modules (depending on the Configuration).

DELAY LEVEL

Range of Settings: 00 to 99	Page 2	Config. 1, 3, 4
	Page 1	Config. 2
	Page 3	Config. 5

Adjusting this value will cause the Delay Output Level for that Send to increase or decrease. Even if this parameter is set to 00, the output of the Delay section can still feed other Effect modules (depending on the Configuration).

QS7.1/QS8.1 Reference Manual 103