Alesis QS8.1, QS7.1 manual Copying Existing Programs Mixes to a NEW Location User Bank

Basic Operation: Part 4

COPYING EXISTING PROGRAMS AND

MIXES TO A NEW LOCATION IN THE

USER BANK

You can readily move copies of existing Programs and Mixes into the User Bank. This is useful if you want to put them in a certain order for recording or performance, or to arrange interesting starter materials in preparation for editing.

The procedure is an easy one.

1)Press [STORE]. The display will look something like this:

2)Using the [VALUE] buttons or the [EDIT VALUE] slider — also known as

[CONTROLLER D] — pick a User Bank location between 000 and 127 (00 and 99 in the case of Mixes). You can also directly enter the number you want using the 23 [SELECTION] buttons.

3)Press [STORE] again, and you’re done.

…OR TO A NEW LOCATION ON A CARD BANK

If you have an SRAM card, you can move a Program or Mix to any one of the banks on the card. The procedure is the same as listed above for copying a single Program or Mix to the User Bank, except that in step 2) you would use the [BANK] buttons to select a Card bank as your destination instead of the User bank. Everything else works the same.

For more about working with SRAM cards, see Part 9: EXTRAS.

QS7.1/QS8.1 Reference Manual 37