Alesis QS7.1, QS8.1 manual MOD1 Level, MOD2 Source, MOD2 Destination, MOD2 Level

Part 6: Editing Effects

MOD1 LEVEL

Range of Settings: -99 to 99 Page 3

This decides the degree to which the Destination will be modulated by the selected Source. Please notice the setting range, which allows you to choose both negative and positive numbers. Don’t be daunted by that — the way it works is very clear in practice.

Here’s an example. Assume that Reverb Decay is the Destination, and Mod Wheel is the Source. In that situation, a positive Level setting would let you increase decay time by moving the Mod Wheel up; while a negative setting would let you decrease decay time using exactly the same motion.

MOD2 SOURCE

Range of Settings: (see list) Page 4

This works the same as described for Mod 1 Source, above, but for the second possible modulation route.

MOD2 DESTINATION

Range of Settings: (see list) Page 5

This works the same as described for Mod 1 Destination, above, but for the second possible modulation route.

MOD2 LEVEL

Range of Settings: -99 to 99 Page 6

This works the same as described for Mod 1 Level, above, but for the second possible modulation route.

QS7.1/QS8.1 Reference Manual 83