Part 6: Editing Effects

DELAY INPUT LEVEL

Range of Settings: <99 to <0> to 99>

Page 2 (Config. 2 only)

This parameter is only available on Send 1 in Configuration #2. It adjusts the level of the signal running from the Delay output to the Pitch Input.

If the chosen Pitch type is Mono Chorus, Stereo Chorus, Mono Flange, or Stereo Flange, then Page 2 through Page 5 of the Pitch function will contain the following four parameters:

WAVEFORM SHAPE

Range of Settings: Sine/Square

Page 2

This determines the LFO’s waveform shape. This parameter only appears when the Mono or Stereo Chorus or Flange are selected. The Waveform Shape of the LFO can be changed from a sine waveform, which provides a smoother, more even sound, to a square waveform, which makes the Chorus or flange effect more pronounced.

SPEED

Range of Settings: 00 to 99

Page 3

This parameter adjusts the LFO Speed of all Pitch types, with the exception of Pitch Detune and Resonator.

DEPTH

Range of Settings: 00 to 99

Page 4

This parameter adjusts the LFO Depth of all Pitch types, with the exception of Pitch Detune and Resonator. The LFO Depth, which is the amount of pitch alteration, can be adjusted to produce the desired effect.

FEEDBACK

Range of Settings: 00 to 99

Page 5

This parameter adjusts the LFO Feedback of all Pitch types, with the exception of Pitch Detune and Resonator. A portion of the output of the Pitch section can be “fed back” into the input in order to make the effect more tonal or pronounced.

The following three parameters only appear if the Pitch type is set to Pitch Detune or Resonator, respectively.

DETUNE

Range of Settings: -99 to +99

Page 2 (Pitch Detune only)

If the Pitch type is Pitch Detune, page 2 will have only this parameter. This adjusts the tuning of the Pitch Detune effect. This can be set between -99 and +99, in 1 cent increments.

QS7.1/QS8.1 Reference Manual

91

Page 97
Image 97
Alesis QS7.1, QS8.1 manual Delay Input Level, Waveform Shape, Depth, Feedback, Detune