Alesis QS7.1, QS8.1 manual HOW 2 Reverbs is Arranged

Part 6: Editing Effects

HOW “2 REVERBS” IS ARRANGED

As you can see by glancing at the diagram, this Configuration differs considerably from the first! Here there are a single Delay, two Pitch effects, and two independent Reverb effects, arranged as follows:

∙Send 1 is routed through a mono Delay, then a stereo Pitch effect, and finally a stereo Reverb effect.

∙Send 2 has no effects of its own, but can be routed to the same Reverb effect as send 1 (if you wish).

∙Send 3 is routed through a mono Pitch effect and then its own stereo Reverb effect.

∙Send 4 has no effects of its own, but can be routed to the same Reverb effect as send 3 (thus echoing the relationship that Send 2 has with Send 1).

∙The Delay, Pitch and Reverb outputs of Send 1 can be routed to the Mix control either singly or in any combination; while Send 2 is routed to the Mix only through the Reverb.

∙Send 3 and Send 4 can be routed to their own separate Mix, but only through the second Reverb effect.

QS7.1/QS8.1 Reference Manual 73