| AMD Confidential |
User Manual | November 21st, 2008 |
Floppy Configuration Options
The floppy is capable of reading disk images of real floppies created with the DiskTool Utility, described in Section 13, on page 161. To use an image, first create an image file with DiskTool and then specify the floppy image file in the Super I/O configuration dialog page.
Difference from Real Hardware
Keyboard, Mouse, Floppy, COM1 and COM2 differ from real hardware. Baud rate, parity, and stop bits are ignored. Communication is always available. Baud rate timing is approximate. Modem status and line status always show the device is ready.
The default values of the control registers are
80 | Chapter 7: Device Configuration |