AOC 15 user manual Tools Required For Field Service Maintenance

Appendix I-2 Recommended Tools For Routine Maintenance					164
			Tools Required For Field Service Maintenance
	Check	Qty	Item	USED ON
		1	Spring Scale	tip brake pull test
		1	Quick-link	tip brake pull test
		2	½ “combination wrench	anemometer u-bolt
		1	¼” combination wrench	anemometer
		2	½ inch socket, 3/8" drive	tip brake nuts
		2	9/16 inch socket, 3/8" drive	tip brake nuts
		2	3/8" drive socket wrench	tip brake nuts, general
		1	250 in-lb torque wrench	tip brake nuts
		2	5/32 Allen wrench	hinge eye fastener
		2	3/32 Allen wrench	catch plate fastener (old)
		1	5/16" Allen wrench	Stearns brake cover fasteners
		1	10 mm Allen wrench	Ringfeder
		1	Loctite 242	tip brake fasteners
		1	Rounded Course File	removing blade epoxy
		1	Flat Steel Brush	rust removal
		2	Small round steel brush	rust removal (approx. 5/8 diameter)
		1	7/16" deepsocket, 1/2" drive
		1	Marine Epoxy	blade repair
		1	Fine sandpaper for metal	general, rust
		1	Big adjustable wrench	general
		1	Small adjustable wrench	general
		1	Rubber Mallet	general
		1	Small sledge hammer	general
		1	Needle nose pliers	general
		2	Flat-head screwdriver	general
		2	Phillips-head screwdriver	general
		2 +	Harnesses	climbing
		2 +	Climbing hardware	climbing
		1	Rope	hauling
		1	Wire crimpers	general
		1	Wire strippers/cutter	general
		1	Electrical Tape	general
		1	Rust inhibitor	general
		1	Vise grips	general
		1	Small Pliers	general
		1	Channel Locks	general
		2	Small Screwdriver	terminal strip
		1	extractor tool	general, blade cable
		3	1.5 ft. bungee cords	tip brake plate restraint
		1	English allen set on keyring	general
		1	razor knife	general

NOTICE: Use of the material contained in this document is subject to the warning on page Iv and the disclaimer on page v of this document.

DOC012R02 AOC 15/50 User Manual Nov 2001