Replacing the Camera Board

1.Connect the camera cable to the camera board. Reapply the kapton tape over the cable and connector.

2.Lower the camera bracket onto the black posts on the rear cover.

3.Replace the two T8 screws.

922-8171

4.Replace the front bezel.

5.Clean and replace the glass panel. Note: This step is very important. Follow the procedures to ensure the glass is clean and free of particles.

6.Replace the access door.

iMac (24-inch Mid 2007) Take Apart — Camera Board  51

Page 51
Image 51
Apple 24-inch mid 2007 manual Replacing the Camera Board, Replace the front bezel