Apple G4 (12-INCH DVI) manual DC-to-DC Board, Part Location

DC-to-DC Board

Tools

This procedure requires the following tools:

•#0 Phillips screwdriver (magnetized preferred)

•Black stick (or other nonconductive nylon or plastic flat-blade tool)

•4 mm socket wrench or needlenose pliers

Note: To organize the screws you remove from the computer, use a tray with divided compartments (such as a plastic ice cube tray).

Part Location

Note: Although this section pictures the DC-to-DC board used in the PowerBook G4 (12- inch DVI) model, the procedure is the same for both models.

DC-to-DC Board PowerBook G4 (12-inch) Take Apart - 45