Other Call Controls
Conference Calls
The number of callers that you can have in a conference depends on the phone system. Contact your system administrator for details.
To add another caller to a call or conference:
1.During the existing call or conference, press 
Conf.
2.Dial the other party.
•If not answered, press either the Drop DSS key or 
Hold, then press 
Conf.
•When answered, press 
Conf again. Any call that was put on hold is now put into the conference.
To display calls in a conference:
CONF on your display, indicates that you are in a conference call.
1.Press 
Menu twice.
2.Press HC&P (held, conference and parked).
3.The 
above 
Conf indicates a conference call. Press 
Conf.
4.To see the details of the different callers in the conference, press 
and 
Next/Prev.
Notes
•To remove a caller from the conference, hang up.
•If the conference contains only two parties, pressing the Drop DSS key to remove the other caller will end the conference.
4400 and 6400 Series User Guide | Page 13 |
IP Office 3.2 |
