Installation 
Stacking
WARNING!!
Stacking should be performed by quali- fied installation personnel only. The ap- pliances are heavy. Take care to use prop- er tools and techniques when lifting and stacking appliances.
1.Remove the drip pan from the top appliance.
2.Attach the legs or casters to the bottom ap- pliance. See page 6.
3.Place the BC14 on the CNV14. Be sure all four sides are flush.
4.Bolt the two appliances together using the bolts provided.
5.GAS APPLIANCES ONLY: Attach the flue vents as shown.
NOTE: For electric appliances proceed to step 6.
6.Replace the drip pan.
7.Connect the gas (if applicable) and electrical. Refer to pages
NOTE: An optional gas manifold may be purchased from Blodgett Combi. Order part number R9570.
NOTE: An optional Drain Assembly/Steam Vent may be purchased from Blodgett Combi. Order part number R9251 for single or top ovens. Order part number R9252 for bottom ovens.
| Hot Air Flue | Steam Generator | |
| (BC14G & | ||
| Flue | ||
Optional | CNV14G only) | ||
| |||
|
| ||
| Drain Assembly/Steam Vent |
|
| |
Mounting |
|
| |
| Bracket |
|
|
| Drip Pan |
|
| 1.125” I.D. Hose | OptionalGas |
| from Drip Pan Drain | |
| Plumbing | |
|
| Manifold |
| BC14 on CNV14 |
| (BC14G & |
| Rear View | CNV14G only) |
Figure 4
7
