5 | When scanning documents that are longer than the feeder tray, you can pull out the feeder |
extension tray, which is located near the edge of the feeder tray. The extension tray will support | |
documents up to 15 inches (381 mm) long. |
To handle longer paper in the exit tray, extend the exit stopper. Adjust the position of the exit stopper so that it will accommodate the length of the documents. The exit stopper is adjustable to 17 inches (432 mm). When scanning a document longer than 17 inches (432 mm) or A3 size (420 mm), fold down the exit stopper so that the longer paper will fit in the exit tray.
Feeder tray
Exit stopper
Feeder extension tray
6 | Load the documents on the feeder tray with the side to be scanned facing up. Note the directional |
“Face Up” icon and the document sizing scale on the ADF door. Slowly push the sheets in the | |
direction of the arrow until they stop. |
To scan in portrait mode, load the documents with the top edge going first into the feeder. To scan in landscape mode, load the documents with the left edge going first into the feeder, as shown in the following diagrams.
www.bbhscanners.com | 56 of 142 |
