Cleaning the Paper Sensor, Waiting Sensors and Double Feed Detector
Preparation: Locate the blower accessory and remove the brush from the blower.
Blower accessory
Blower
Sensor or detector
1
2
3
Press the power button to the OFF position.
Push the ADF door release button to open the ADF door.
Use the blower accessory to blow off any dirt from the surface of the paper sensor and waiting sensor. Also, blow off any dirt from the surface of the metal reflector sheet used by the waiting sensor.
Waiting sensor
Reflector sheet for waiting sensor
Paper sensor
www.bbhscanners.com | 83 of 142 |
