Press MENU.
Press a or b to display Fax. Press Fax.
Press MENU.
Press a or b to display Fax. Press Fax.

Chapter 9

Additional Message Center operations

Setting the maximum time for incoming messages

Your machine’s default setting will save incoming messages up to 30 seconds long. To change this setting follow the steps below:

a b c

d Press a or b to display Setup Msg Ctr.

e Press Setup Msg Ctr.

f Press ICM Max.Time.

g Press the maximum time setting for incoming messages (30, 60, 120 or

180seconds).

h Press Stop/Exit.

Setting toll saver

When the toll saver feature is on, the machine will answer after two rings if you do have voice or fax messages, and after four rings if you do not have any messages.

This way, when you call your machine for remote retrieval, if it rings three times, you have no messages and can hang up to avoid a toll charge.

The toll saver feature is only available when Message Center mode is on. When toll saver is On, it overrides your ring delay setting.

If you are using Distinctive Ring, do not use the toll saver feature.

a b c

d Press a or b to display Setup Receive.

e Press Setup Receive.

f Press a or b to display Ring Delay. g Press Ring Delay.

h Press Toll Saver.

i Press On (or Off).

j Press Stop/Exit.

86